+61 (04) 3599 1950
enquiries@biostatengineering.com
  • Home
  • About us
  • Services
  • Products
  • FAQ
  • Distributors
  • Contact Us

Flowell

July 27, 2016support
What is Flowell
Advantages of Flowell
Guarenteed to extend the life of your submersed pump and yield of the borehole or well
Flowell usage table
What is Flowell

Mineral encrustations, biofouling of the pump and deep well screen and surrounding formation are a major contributor to bore and pump reduced capacity. The deposits can be hard or soft sludge like material.

These deposits affect the inflow capacity of the bore by blocking the slots or holes in the screens: and the outflow capacity by blocking the flow of water into the pump intake.

It is expected over time; almost all bores and well will expirenece some loss in specific capacity. One of the common reason is the result of biofouling (clogging).

Early intervention will ensure at the very least, that a bore with reduced capacity can be rehabilitated.

If the capacity of the bore has declined by 20 to 25% it is prudent to initiate an investigation rehabilitation procedure. Delay can significantly increase cost.

Flowell is a propriety polymeric formulated blend. Flowell contain all the chemistries needed to achieve positive results and get the water flowing again.

Advantages of Flowell
  • Restores bore water yeild depleted by biofouling
  • Helps prevent borehole pump failure
  • Complete bore hole or well clean out
  • Dissolves iron buildup in water bores and wells
  • Cleans out iron and sulphate bacteria fouling
  • Reduces pump maintenance
Guarenteed to extend the life of your submersed pump and yield of the borehole or well
Flowell is a Polymeric Granular acidic detergent formulation for CIP applications, where stainless steel and other surfaces require removal of rust, scale, mineral depositis and for borehole and/or well rehabilitation where there is a presence of iron and sulfate reducing bacteria clogging.

When added to water in the treatment area, Flowell becomes a highly active agent capable of dissolving borehole and pipe clogging, destroying the bacteria and other nuisance micro organisms.

How much? Dependant upon the amount of clog in the bore, however 5 – 10% by weight to volume of the water in the bore will give excellent results. Simply pour the granules in the bore while the bore pump is circulating the water in the bore, or dissolve the required amount of Flowell in water, before pouring it into the borehole.

Availible in 10kg pails

Flowell usage table
Flowell-Table
  • This field is for validation purposes and should be left unchanged.
DOWNLOAD BROCHURE

Our Products

  • Accu-San
  • BoreVac
  • ChloSan
  • CWPUV(Clean Water Plant) Series
  • Drinksafe-3
  • Drinksafe-8
  • DWP(Dirty Water Plants) Series
  • HaloVac
  • Flowell
  • LakeVac
  • PolyVac
  • Screen Clean Plus
  • TIRM DMI65
©2016 Biostat Engineering site by:  cyanweb